Elko Plumbers Near You

When a toilet gurgles while the shower drains slowly, or when using the washing machine causes a floor drain to back up, the blockage is almost certainly in the main sewer line - not in any individual fixture. Tree roots, grease accumulation, or a collapsed section of pipe are common causes. Roto-Rooter uses camera inspection to locate the exact problem before clearing it.

Yes. Ice maker supply lines are small-diameter water lines that connect to your home's plumbing, and a slow leak behind the refrigerator can go unnoticed for weeks while water seeps into the subfloor. A Roto-Rooter technician inspects the line, the compression fitting, and the shutoff valve, then replaces whatever is failing to stop the leak at its source.

A running toilet is almost always a worn flapper or a faulty fill valve. The flapper no longer seals the flush valve seat, so water trickles continuously from the tank into the bowl. Replacing the flapper is straightforward, but if the fill valve is also failing, both components should be replaced together. A Roto-Rooter technician can diagnose and fix it in a single visit.

That rumbling sound almost always points to sediment - mineral deposits that settle on the bottom of the tank and get disturbed when the burner fires. As sediment accumulates, the heater works harder and loses efficiency. A Roto-Rooter technician can flush the tank, inspect the anode rod, and test the pressure relief valve to determine whether a flush restores performance or a replacement is needed.

Slow bathroom drains almost always come from hair and soap scum binding together just past the P-trap. Store-bought drain cleaners can dissolve some buildup but often leave the bulk of the clog intact. A Roto-Rooter technician clears the full obstruction with an auger, reaching past the P-trap into the branch line where the real accumulation tends to sit.

A cable auger - or drain snake - punches through a blockage to restore flow, but it leaves residue on the pipe wall. Hydro jetting uses high-pressure water to scour the interior surface, removing calcified grease, mineral scale, and root debris that a cable can't cut away. For drains that keep clogging every few months, hydro jetting addresses the buildup that causes the recurring problem.

Cooking grease enters drains even when you're careful - residue from pans, plates, and food solids all contribute. Grease cools quickly inside the pipe and layers on the wall, narrowing the opening over time. A Roto-Rooter technician clears the P-trap and branch line, and if buildup has reached deeper into the line, hydro jetting removes it so the clog doesn't rebuild within weeks.

Whole-house low pressure usually traces back to a failing pressure reducing valve, a partially closed main shutoff, or a leak somewhere in the supply line. A Roto-Rooter technician diagnoses the source by testing pressure at multiple points. Once the cause is confirmed - whether it's a worn PRV or a corroded supply pipe - the repair restores normal flow to every fixture.

Yes. Roots seek moisture and enter drain lines through hairline cracks at pipe joints, particularly in older clay or cast iron sewer laterals. Once inside, they expand as they absorb moisture and eventually cause recurring blockages or pipe damage. The Roto-Rooter Machine is specifically designed to cut through root intrusion. A sewer camera confirms whether roots are the cause and shows the extent of the growth.