Craig Plumbers Near Me
Frequently Asked Questions in Craig
What should I do immediately after a pipe bursts or a major water leak floods part of my home?
Shut the main water supply valve first to stop the source. Then call Roto-Rooter at 970-824-8305 - available 24/7, 365 days a year - for emergency service in Craig, CO. Technicians arrive to extract standing water, assess moisture depth in building materials, and begin structural drying with air movers and dehumidifiers. Acting within the first 24-48 hours is critical: wet drywall that is not dried quickly typically has to be removed entirely.
What causes low water pressure throughout my whole house?
Whole-house low pressure usually points to one of three causes: a partially closed main shutoff valve, a failing pressure reducing valve that is no longer maintaining the correct downstream pressure, or a leak somewhere in the supply line that is bleeding off flow before it reaches your fixtures. Roto-Rooter technicians diagnose each possibility systematically - checking the PRV setting, inspecting the shutoff, and tracing the supply line - before recommending a repair.
My basement floor drain is backing up. Is that a drain problem or a bigger issue?
A basement floor drain sits at the lowest point in the home's drainage system, so it backs up first when the main line is compromised. If only the floor drain is slow, the blockage may be local to that branch. If it backs up while other fixtures are in use, the main line is almost certainly involved. Roto-Rooter technicians clear the immediate backup and use a camera to determine whether the problem is isolated or systemic.
How can a sewer camera inspection help if I already know the drain is clogged?
Clearing the immediate clog is step one, but a camera tells you why it keeps coming back. A sewer camera travels the length of the drain line and reveals root intrusion at pipe joints, a belly in the line where solids collect, or a partially collapsed section that traps debris. Without that information, the same stretch of pipe will clog again. Roto-Rooter technicians use inspection results to recommend the right long-term fix.
Tree roots got into my sewer line. How bad is that?
Roots enter through hairline cracks at pipe joints - usually in older clay or cast iron laterals - and expand as they absorb moisture. A small intrusion causes recurring slow drains; a heavy infestation can block the line entirely or crack it further. Roto-Rooter's Roto-Rooter Machine cuts through root masses to restore flow, and a follow-up camera inspection shows whether the pipe wall needs repair to prevent re-entry.
How do I know when my septic tank needs to be pumped?
Septic tanks need pumping roughly every 3-5 years, but the real signal is performance: slow drains throughout the house, gurgling sounds, or odors near the drainfield all suggest the tank is filling. When the sludge and scum layers reach the outlet baffle, solids can escape into the drainfield and clog the soil - a much costlier repair than routine pumping. Roto-Rooter technicians pump the tank and inspect the outlet to confirm the system is functioning properly.
All my drains are slow at the same time. What does that mean?
When multiple fixtures back up simultaneously - toilets gurgling while sinks drain slowly - the blockage is almost always in the main sewer line, not in an individual fixture drain. A main-line clog sits between your house and the city connection and affects everything upstream. Roto-Rooter uses a sewer camera to confirm the location and nature of the blockage before clearing it with an auger or hydro jetting.
Why does my toilet keep running after I flush it?
A running toilet almost always traces back to a worn flapper or a faulty fill valve. The flapper seals the tank between flushes; when it degrades, water trickles continuously into the bowl and the fill valve never shuts off. Roto-Rooter technicians diagnose which component has failed and replace it on the spot. Left unchecked, a running toilet can waste hundreds of gallons a month.
My water heater is making a rumbling noise. Is that serious?
Rumbling usually means sediment has settled on the bottom of the tank. As the burner heats the water, it forces steam through that layer of sediment - creating the noise and forcing the heater to work harder. A Roto-Rooter technician will flush the tank, inspect the anode rod, and check the pressure relief valve and thermostat to determine whether flushing is enough or a replacement is needed.
What's the difference between snaking a drain and hydro jetting?
A cable auger - or drain snake - cuts through a blockage to restore flow, but it leaves residue on the pipe walls. Hydro jetting sends a high-pressure water stream through the line, scouring the interior surface and removing calcified grease, mineral scale, and root debris. For drains that clog repeatedly, hydro jetting removes the buildup that keeps causing the problem, not just the immediate plug.
How do I know if I have a hidden water leak behind my walls?
Hidden leaks often show up as damp drywall, peeling paint, a musty smell, or an unexpectedly high water bill before you ever see standing water. Roto-Rooter technicians use moisture meters and visual inspection to trace leaks behind walls and under slabs without unnecessary demolition. Finding the source early prevents structural damage that compounds the longer water sits. Call 970-824-8305 to schedule a leak detection visit.
